PX-D110M TECHLITE™ MILITARY GRADE LED/LASER TEST SET

PX-D110M TECHLITE™ MILITARY GRADE LED/LASER TEST SET
Product Code: PX-D110M
Availability: Call For Availability
Price: $5,195.00
Qty:  
   - OR -   

The TECHLITE™ PX-D110M test sets allow technicians to perform precise optical measurements in the field. When operated in absolute power mode, the B220M meter is used to determine the level of optical power being emitted from a transmitter. In relative mode, it is used with the included source to perform fiber loss measurements or splice tuning operations.

TECHLITE™ meters and sources were designed to be rugged. As with all Photonix test instruments, the internal circuitry is housed within an aluminum extrusion with high impact rubber bumpers. In addition, the instruction guide is fully laminated to make it weather-resistant and virtually tear-proof.

The TECHLITE™ meter, in relative measurement mode, will store the zero reference reading for all four wavelengths independently in non-volatile memory. This allows all zero references to be taken at one time and also allows the unit to be turned off while moving between locations preserve battery life. Also in relative mode, the meters will also display a 1dB analog typedeviation pointer and an mini-display for real time splice tuning.The TECHLITE™ meters utilize a graphic LCD screen to createunusually large and easy to read numbers as graphics to indicatepower levels.

The included TECHLITE™ PX-C202M LED source offers advanced temperature and coupling stability as well as enhanced CPR performance to provide superior test accuracy. Both the PX-C202M and the PX-C205M LASER sources, offer the ability to operate one or both outputs simultaneously in either CW, 30Hz, 500Hz, or 2kHz modulation for use with leak detectors or fiber identifiers.

The units are powered by either four AA alkaline batteries or an AC wall pack with four AA NiMH cells (both the wall pack and NiMH cells are included). In addition to standard charge mode, the units feature an emergency quick charge mode that allows the user to charge the batteries in approximately 4 hours. A 20 minute auto power off feature is also switch selectable from the top panel on all units.

Power Meter PX-B220M LED SOURCE PX-C202M LASER SOURCE PX-C205M
Parameter Value Parameter Value Parameter Value
Wavelength 800-1600nm Wavelength 850,1300nm (+/-30nm) Wavelength 1310,1550nm(±30nm)
Calibration Points 850,1300,1310,1550nm Fiber Size 62.5/125 (max) Line Width 5nm
Power Range +3 to -55dBm Port Style ST Port Style ST
Resolution 0.01dB Source Pmin -21dBm Pmin (9/125) -10.0dBm CW
Accuracy ±0.25dB Stability(4hr) ±0.10dB Stability ±0.10dB (4hr)
Linearity (+3 to -40dBm) ±0.30dB Stability(0-50°C) ±0.50dB Stability 2410.75dB(0-50°C)
Linearity (-40 to -55dBm) ±0.50dB Repeatability ±0.10dB Repeatability ±0.20dB
Repeatability ±0.10dB Bandwidth 35(850nm)/170(1300nm) Bandwidth 5nm(1310,1550nm)
Detector Ge CPR at 850nm 25-29dB +/-1.0 Modulation CW,30Hz,500Hz, 2kHz
Operation Modes dB,dBm, Watts CPR at 1300nm 21-25dB +/-0.5 Warmup Time 15 minutes
Light Susceptibility <-55dBm Modulation CW,30Hz,500Hz, 2kHz    
    Warmup Time 15 minutes    
ALL UNITS
Parameter Value Parameter Value Parameter Value
Operating Temp 0°C to 50°C Storage Temp -20°C to 60°C Humidity 10% - 90% non-cond.
Line Power 110/220VAC, 50-60Hz Battery Power NiMH 4-AA or Alkaline Battery Life 10 Hours(typ)
Charge Time 12 Hours(typ) Trickle Charge Time 4 Hours(typ) Quick Performance Spec MIL-T-28800

 

~ Meter: 850nm / 1300nm / 1310nm / 1550nm with interchangeable meter adapters
~ LED Source: 850nm/1300nm
~ LASER Source: 1310nm/1550nm
~ Reel style connector cleaner
~ SC,FC,LC or ST adapters
~ SMF patch cords ST-FC, ST-SC, ST-LC
~ MMF patch cords ST-FC, ST-SC, ST-LC
~ Crush resistant aluminum bodies
~ 0.01 dB Meter resolution
~ Controlled LED CPR operation
~ Built in quick charger
~ Sealed waterproof carry case
~ Two year warranty

 

 

Distributor
Their Price
Buy From Them Now
ValueTesters $4,935.25

 

Powered By OpenCart
Photonix Technologies © 2024   Designed by santosh setty